Tests
  Lab Tests
  Savings
  Reports
  Clients
  Articles
  Diesel Bugs
  Quality
  FAQ
  Home 
  Contact
  Products
  Buy Online

 

 
 
 


L1000 De-Bug Clean Fuel Unit


The L1000 De-Bug Unit eliminates existing microbial infestations and continually prevents infestations from re-occurring, simply by using the engine or re-circulation system. Time proven and Independent Laboratory Tests and 25 Years of Use with Genuine User Endorsements 
 

If you have bugs in your fuel/ oil you can expect a notable improvement in power, fuel use savings* around 5%+ in  and filters will last normal service intervals. Injectors and fuel won't block or corrode because of the diesel bugs.      

 

 

For: Diesel fuel, marine diesel, light oils, gas oil, jet, kerosene.
Engine Ratings:
100 to 650 horsepower.

Max Hourly
Flow Rate: 1,000 litres per hour.
Flow Direction with unit mounted:
Both Left-Right & Right-Left

Materials:
LM6 - marine grade, anti corrosive aluminium alloy.
Weight:
1.98 kilograms.
Size:
114mm wide, 194mm high, 110mm deep.
Port Size
:
 SAE J514 Dash 10  - Straight Thread O-Ring Boss - 1/2" *see below for SAE J514 table
Operating Pressure: 50 psi. 
Installation:
Two 10mm bolts. 

 Applications: Trucks, generator sets, machinery, Boats, bulk tanks and fluid treatment applications
 up to 1000 L/hour.
  

Fitting and Operating
The L1000 De-Bug Unit is the size of a typical filter housing and is easily installed to the fuel line before the primary filter. As most Diesels have recirculating fuel systems, the diesel is continuously passed through the L1000 De-Bug Unit to provide systematic destruction of microbial contaminants in the fuel tank. Your filters remain virtually clear of slime and the engine will retain operating efficiencies longer over service cycles. All of these benefits are permanently achieved without the use of any biocide chemicals. Provided the unit is properly fitted and used, the L1000 De-Bug Unit is guaranteed to significantly reduce microbial contamination.

The L1000 De-Bug Unit is unconditionally guaranteed against manufacturing defects for 12 months.

*Buy Now Online  

SAE J514, Straight Thread O-Ring Boss

Dash
Size
Inch
Size
Thread Male
Thread
O.D. mm
Male
Thread
O.D. inches
Female
Thread
I.D. mm
Female
Thread
I.D. inches
2 1/8 5/16-24 7.9 .31 6.9 .27
3 3/16 3/8-24 9.6 .38 8.6 .34
4 1/4 7/16-20 11.2 .44 9.9 .39
5 5/16 1/2-20 12.7 .50 11.4 .45
6 3/8 9/16-18 14.2 .56 12.9 .51
8 1/2 3/4-16 19.0 .75 17.0 .67
10 5/8 7/8-14 22.3 .88 20.3 .80
12 3/4 1 1/16-12 26.9 1.06 24.9 .98
14 7/8 1 3/16-12 30.0 1.18 27.7 1.09
16 1 1 5/16-12 33.3 1.31 31.0 1.22
20 1 1/4 1 5/8-12 41.4 1.63 39.1 1.54
24 1 1/2 1 7/8-12 47.7 1.88 45.5 1.79
32 2 2 ˝-12 63.5 2.50 61.2 2.41

 

Return to Unit Table

  


 

 

 

   *Buy Online Now

 

 

Member

 

 

Copyright©1998-2014 Morison & Morison Pty Ltd  A.B.N. 18 079 223 911

This page was last updated on Saturday, 14 June 2014