Home
  Tests
  Lab Tests
  Savings
  Reports
  Clients
  Articles
  Diesel Bugs
  Quality
  FAQ
  Products
  Contact
  Buy Online

 

 
 
 


L5000 De-Bug Clean Fuel Unit

The L5000 De-Bug Unit eliminates existing microbial infestations and continually prevents infestations from re-occurring, simply by using the engine or re-circulation system. Time proven and Independent Laboratory Tests and 25 Years of Use with Genuine User Endorsements  

If you have bugs in your fuel/ oil you can expect a notable improvement in power, fuel use savings* around 5%+ in  and filters will last normal service intervals. Injectors and fuel won't block or corrode because of the diesel bugs.      

 

 

For: Diesel fuel, marine diesel, light oils, gas oil, jet, kerosene.
Engine Ratings:
1,000 to 8,000 Hp

Max Hourly
Flow Rate: 5,000 litres/ hr.
Materials:
  LM24 - marine grade, anti corrosive aluminium alloy.
Weight:
21.5 kilograms.
Size:
375mm wide, 333mm high, 386mm deep.

Port Size: SAE J514 Dash 24  - Straight Thread O-Ring Boss.
Operating Pressure:
50 psi.
Installation:
Two 16mm mounting holes on the backing flange

Applications: Turbine and Cylinder engines - Ships,  Locomotives, Power Generation, and fluid treatment applications up to 5,000 litres per hour.   

Fitting and Operating
The L5000 De-Bug Unit is a one pass system providing systematic elimination of microbial contaminants. Installation is after the water separator and before the primary filter.

Provided the unit is properly fitted, and used, the L5000 De-Bug Unit is guaranteed to significantly reduce microbial decontamination. The L5000 De-Bug Unit is unconditionally guaranteed against manufacturing defects for one year (12 months).

NOTE: Disassembly of magnet stack voids all guarantees and warranties.  

Ordering Information

Ambrosia III - Main Power 2 x Cat 1250 hp Engines
Each fitted with 1 x L5000 De-Bug Clean Fuel Unit

 

 

SAE J514, Straight Thread O-Ring Boss

Dash
Size
Inch
Size
Thread Male
Thread
O.D. mm
Male
Thread
O.D. inches
Female
Thread
I.D. mm
Female
Thread
I.D. inches
2 1/8 5/16-24 7.9 .31 6.9 .27
3 3/16 3/8-24 9.6 .38 8.6 .34
4 1/4 7/16-20 11.2 .44 9.9 .39
5 5/16 1/2-20 12.7 .50 11.4 .45
6 3/8 9/16-18 14.2 .56 12.9 .51
8 1/2 3/416 19.0 .75 17.0 .67
10 5/8 7/8-14 22.3 .88 20.3 .80
12 3/4 1 1/16-12 26.9 1.06 24.9 .98
14 7/8 1 3/16-12 30.0 1.18 27.7 1.09
16 1 1 5/16-12 33.3 1.31 31.0 1.22
20 1 1/4 1 5/8-12 41.4 1.63 39.1 1.54
24 1 1/2 1 7/8-12 47.7 1.88 45.5 1.79
32 2 2 �-12 63.5 2.50 61.2 2.41

Return to Unit Table

  


 

 

 

   *Buy Online

 

 

Member

 

 

Copyright�1998-2014 Morison & Morison Pty Ltd  A.B.N. 18 079 223 911

This page was last updated on Saturday, 14 June 2014